If you’ve ever worked on heavy equipment, you know they are made up of a massive number of parts, both big and small making it run smoothly. This list includes the tires that help the machinery get around in a wide range of challenging terrains. However, there’s much more to know about maintaining these tires than you’d think. This article will cover everything you need to know about maintaining and replacing tires on heavy machinery.
Basics of Maintenance
You should know a few basic things about maintaining tires used on heavy machinery, including when to inspect, clean, and repair or replace them.
First, you should inspect the tires on any piece of heavy machinery each day before starting work. If it’s a recreational machine, the tires should still be inspected before each use. Large machinery is usually on construction sites, in fields of crops, or in other places with turned-up ground, where debris is likely to get stuck in and around the tires, causing damage. This problem should be addressed as soon as it’s spotted.
Next, make sure to clean the tires after every use. This may be at the end of a shift on the construction site or the day on the farm. Try to clear any debris or hazardous material that may have gotten stuck to the tires during use. This chore will help the tires last longer and prevent possible damage.
And finally, you should know when you need to replace your tires. Look for signs of wear and tear or a worn tread. Tires on heavy machinery should always be kept in good, functioning condition to avoid loss of traction or balance while driving. A flat tire, for example, could cause an accident or hold everyone up while the tire is repaired or replaced.
Replacing Your Tires
So, when it comes time to replace the tires on your piece of heavy machinery, what is there to know? First, you want to pay attention to the classification of the tires you need to replace, as every piece of heavy machinery will have different tires. Next, keep in mind other specifics you want or need, such as tread pattern, wheel assembly, or inflation pressure. These specifications can vary on where the machinery is being used. If in doubt, ask for advice from an experienced tire supplier – they can recommend the best options for the job and budget.
OTR Tires
Do you use heavy machinery for work or recreation? Then check out OTR Tires, a leader in industrial tires for sale. They can handle all your tire replacement needs. With years of experience and knowledge under their belts, they’ll be able to recommend the best tire for the job. Call 888-208-8473 and see what we can do for you.